-Celine
Side panels + Top back support + Front bottom support + Back support + Front trim + Front trim between drawers vertically + Draws (cut to fit) +Top
Secure the back pieces of wood to the sides of the dresser, then add the front boards
Attach vertical dividers putting the pocket holes on the back
Build 3 small drawers and 4 larger drawers, cut the drawer faces to leave a gap on all sides
Sand the dresser frame, rounded out the edges of the legs,
Build top of the dresser, attached the frame using pocket holes and pocket hole screws
Prep using a paint primer, then paint
Measure and add the knobs to each of the drawers, then add drawer slides
Once all the drawer slides are in place, then insert the drawers and attached the face frames
BATHROOM RENOVATION
CAULK YOUR HOME
UNDERMOUNT SINK BUTCHER BLOCK